GETTING ORGANISED - PROJECT GLOCK

MATERIALS:      

• 3000mm x 420mm x 30mm Timber slab (maple)
• 2440mm x 1220mm x 8mm Plywood sheet
• 3000mm x 32mm x 3mm High Carbon Steel
• 3000mm x 6mm surgical rubber tubing (suspension)
• 1.5mm pins (QTY: 8)
•  50 x 2.80mm bullet head nails (QTY: 42)
• 10G x 30mm stainless steel countersunk screws (QTY: 8)
• 100G x 12mm x 1.60mm tacks
• 2000mm x 3mm plastic tubing (1/8”)
• Rubber blanking caps (3/16”) (QTY: 42)
• 1800mm x 4mm dowel
• Wooden beads approx. 15mm (QTY:2) 

The 3m maple slab was taken to Tolga woodworks and machined by a professional (Figure 1).

TIMBER DIMENSIONS:
 
4 x 600mm x 40mm x 13mm
2 x 800mm x 100mm x 20mm
1 x 450mm x 100mm x 20mm
1 x 350mm x 100mm x 20mm
1 x 450mm x 115mm x 13mm
1 x 350mm x 115mm x 13mm
 
The high carbon steel bars were also machined and drilled professionally to achieve the best results.
 
STEEL BAR DIMENSIONS:

B :  185mm x 32mm x 3mm
C :  177mm x 32mm x 3mm
C#/D♭ : 173mm x 32mm x 3mm
D :  166mm x 32mm x 3mm
D#/E♭ : 163mm x 32mm x 3mm
E : 158mm x 32mm x 3mm
F :  153mm x 32mm x 3mm
F#/G♭ :  149mm x 32mm x 3mm
G : 146mm x 32mm x 3mm
G#/A♭ : 141mm x 32mm x 3mm
A : 138mm x 32mm x 3mm
A#/B♭ : 133mm x 32mm x 3mm
B : 130mm x 32mm x 3mm
C : 126mm x 32mm x 3mm
C#/D♭ : 122mm x 32mm x 3mm
D : 118mm x 32mm x 3mm
D#/E♭ : 116mm x 32mm x 3mm
E : 112mm x 32mm x 3mm
F : 108mm x 32mm x 3mm
F#/G♭: 106mm x 32mm x 3mm
G : 102mm x 32mm x 3mm